Lincoln Vehicle Models Lincoln MKT 2010-2019
Lincoln Vehicle Models Lincoln MKT 2010-2019 Torque Specifications
Complete Lincoln Vehicle Models Lincoln MKT 2010-2019 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
3.5l Twin Engine
Torque specifications for 3.5L-TWIN Engine
3.5l Twin Engine
Torque specifications for 3.5L-TWIN Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 23 ft-lbs (31 N·m)
2. 90°
Important Notes
Follow the specified torque sequence for proper sealing. Failure to do so may result in leaks or engine damage.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.75
1
Main Bearing Bolts
M12 x 1.75
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Ensure proper alignment of the main bearings before tightening.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper alignment of the connecting rod caps before tightening.
Turbocharger System
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar turbocharger systems. Ensure proper alignment before tightening.
2 Turbocharger Oil Feed Line Bolts
M6 x 1.0
2
Turbocharger Oil Feed Line Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar oil line connections. Ensure proper sealing to prevent leaks.
Intake And Exhaust
1 Intake Manifold Bolts
M8 x 1.25
1
Intake Manifold Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure proper alignment and sealing of the intake manifold gasket.
2 Exhaust Manifold Bolts
M10 x 1.5
2
Exhaust Manifold Bolts
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper alignment and sealing of the exhaust manifold gasket.
Cooling System
1 Water Pump Bolts
M8 x 1.25
1
Water Pump Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper alignment and sealing of the water pump gasket.
2 Thermostat Housing Bolts
M6 x 1.0
2
Thermostat Housing Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure proper alignment and sealing of the thermostat housing gasket.
3.5l V6 Twin Turbo Engine
Torque specifications for 3.5L-V6-TWIN-TURBO Engine
3.5l V6 Twin Turbo Engine
Torque specifications for 3.5L-V6-TWIN-TURBO Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 23 ft-lbs (31 N·m)
2. 90°
Important Notes
Follow the specified torque sequence for proper sealing. Failure to do so may result in leaks or engine damage.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.75
1
Main Bearing Bolts
M12 x 1.75
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Ensure proper alignment of the main bearings before tightening.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper alignment of the connecting rod caps before tightening.
Turbocharger System
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar turbocharger systems. Ensure proper alignment before tightening.
2 Turbocharger Oil Feed Line Bolts
M6 x 1.0
2
Turbocharger Oil Feed Line Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar oil line connections. Ensure proper sealing to prevent leaks.
Intake And Exhaust
1 Intake Manifold Bolts
M8 x 1.25
1
Intake Manifold Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure proper alignment and sealing of the intake manifold gasket.
2 Exhaust Manifold Bolts
M10 x 1.5
2
Exhaust Manifold Bolts
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper alignment and sealing of the exhaust manifold gasket.
Cooling System
1 Water Pump Bolts
M8 x 1.25
1
Water Pump Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper alignment and sealing of the water pump gasket.
2 Thermostat Housing Bolts
M6 x 1.0
2
Thermostat Housing Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure proper alignment and sealing of the thermostat housing gasket.
3.7l Engine
Torque specifications for 3.7L Engine
3.7l Engine
Torque specifications for 3.7L Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 Engine Block to Cylinder Head Studs
M14 x 1.5
2
Engine Block to Cylinder Head Studs
M14 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on general engine assembly practices.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
Torque Specification
110 ft-lbs (149 N·m)
Valvetrain and Timing
1 Camshaft Sprocket Bolt
M12 x 1.5
1
Camshaft Sprocket Bolt
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
2 Timing Belt/Chain Tensioner Bolt
M10 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Engine Mounts and Transmission
1 Engine Block to Transmission Mounting Bolts
M14 x 1.5
1
Engine Block to Transmission Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general engine assembly practices.
2 Engine Block to Engine Mounting Bolts
M14 x 1.5
2
Engine Block to Engine Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general engine assembly practices.
Intake and Exhaust
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Fuel and Ignition
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
2 Ignition Coil Bolt
M6 x 1.0
2
Ignition Coil Bolt
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Cooling and Lubrication
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2 Oil Filter Cap
2
Oil Filter Cap
Torque Specification
N/A
Important Notes
Hand tight only.
3.7l V6 Engine
Torque specifications for 3.7L-V6 Engine
3.7l V6 Engine
Torque specifications for 3.7L-V6 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 Engine Block to Cylinder Head Studs
M14 x 1.5
2
Engine Block to Cylinder Head Studs
M14 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on general engine assembly practices.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
Torque Specification
110 ft-lbs (149 N·m)
Valvetrain and Timing
1 Camshaft Sprocket Bolt
M12 x 1.5
1
Camshaft Sprocket Bolt
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
2 Timing Belt/Chain Tensioner Bolt
M10 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Engine Mounts and Transmission
1 Engine Block to Transmission Mounting Bolts
M14 x 1.5
1
Engine Block to Transmission Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general engine assembly practices.
2 Engine Block to Engine Mounting Bolts
M14 x 1.5
2
Engine Block to Engine Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general engine assembly practices.
Intake and Exhaust
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Fuel and Ignition
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
2 Ignition Coil Bolt
M6 x 1.0
2
Ignition Coil Bolt
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Cooling and Lubrication
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2 Oil Filter Cap
2
Oil Filter Cap
Torque Specification
N/A
Important Notes
Hand tight only.
6f50 Transmission
Torque specifications for 6f50 Transmission
6f50 Transmission
Torque specifications for 6f50 Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
These bolts secure the transmission to the engine block or transmission crossmember.
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M8 x 1.25
1
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
These bolts secure the oil pan to the transmission case.
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M14 x 1.5
1
Transmission Drain and Fill Plugs
M14 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
These plugs allow for the transmission fluid to be drained and filled.
2 Transmission Fluid Drain/Fill Plug
M14 x 1.5
2
Transmission Fluid Drain/Fill Plug
M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
This plug allows for the transmission fluid to be drained and filled.
6F50 Transmission Bellhousing
1 6F50 Transmission Bellhousing Bolts
M14 x 1.5
1
6F50 Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
These bolts secure the bellhousing to the transmission case. Estimated value based on general guidelines for similar transmission components.
6F50 Transmission Valve Body
1 6F50 Transmission Valve Body Bolts
M10 x 1.25
1
6F50 Transmission Valve Body Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
These bolts secure the valve body to the transmission case. Estimated value based on general guidelines for similar transmission components.
6F50 Transmission Solenoid Pack
1 6F50 Transmission Solenoid Pack Bolts
M8 x 1.25
1
6F50 Transmission Solenoid Pack Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
These bolts secure the solenoid pack to the transmission case. Estimated value based on general guidelines for similar transmission components.
6F50 Transmission Filter
1 6F50 Transmission Filter Bolts
M8 x 1.25
1
6F50 Transmission Filter Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
These bolts secure the transmission filter to the transmission case. Estimated value based on general guidelines for similar transmission components.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension and Steering
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
2 Control Arm Bolts
M14 x 1.5
2
Control Arm Bolts
M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
3 Steering Gear/Rack Bolts
M12 x 1.5
3
Steering Gear/Rack Bolts
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Brake System
1 Brake Caliper Bolts
M10 x 1.5
1
Brake Caliper Bolts
M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Body and Frame
1 Body Mount Bolts
M16 x 1.5
1
Body Mount Bolts
M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Consult vehicle manufacturer's recommendations for accurate torque value.
2 Fuel Tank Strap Bolts
M12 x 1.5
2
Fuel Tank Strap Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Doors and Hood
1 Door Hinge Bolts
M10 x 1.5
1
Door Hinge Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult vehicle manufacturer's recommendations for accurate torque value.
2 Hood Hinge Bolts
M10 x 1.5
2
Hood Hinge Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult vehicle manufacturer's recommendations for accurate torque value.
3 Trunk Lid Hinge Bolts
M10 x 1.5
3
Trunk Lid Hinge Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult vehicle manufacturer's recommendations for accurate torque value.
Bumpers
1 Bumper Mounting Bolts
M12 x 1.5
1
Bumper Mounting Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Consult vehicle manufacturer's recommendations for accurate torque value.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper
1 Brake Caliper Bolts
M10 x 1.25
1
Brake Caliper Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the caliper is properly aligned before torquing.
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Ensure the bracket is properly seated against the steering knuckle or axle.
Brake Disc Drum
1 Brake Disc/Drum Retaining Bolts
M8 x 1.25
1
Brake Disc/Drum Retaining Bolts
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Ensure the disc or drum is properly seated on the hub before torquing.
Brake Hydraulics
1 Brake Hose Banjo Bolt
M10 x 1.0
1
Brake Hose Banjo Bolt
M10 x 1.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the sealing washers are properly seated and not damaged.
2 Brake Master Cylinder Mounting Bolts
M8 x 1.25
2
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the master cylinder is properly aligned with the brake booster.
3 Brake Booster Mounting Bolts
M8 x 1.25
3
Brake Booster Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the booster is properly seated against the firewall.
Brake Pedal
1 Brake Pedal Assembly Bolts
M8 x 1.25
1
Brake Pedal Assembly Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the pedal assembly is properly aligned with the master cylinder pushrod.
Wheel
1 Wheel Lug Nuts
M12 x 1.5
1
Wheel Lug Nuts
M12 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Always use a torque wrench to ensure proper tightening. Over-tightening can damage the wheel or hub.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine and Transmission Mounting
1 Engine Block to Transmission Bellhousing Bolts
M12 x 1.5
1
Engine Block to Transmission Bellhousing Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.
2 Transmission Crossmember Bolts
M14 x 1.5
2
Transmission Crossmember Bolts
M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on industry standards.
Flywheel and Crankshaft
1 Flywheel Bolts
M10 x 1.5
1
Flywheel Bolts
M10 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
2 Main Bearing Bolts
M12 x 1.5
2
Main Bearing Bolts
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Crankshaft and Connecting Rods
1 Connecting Rod Nuts
M8 x 1.25
1
Connecting Rod Nuts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Crankshaft Pulley and Harmonic Balancer
1 Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5
1
Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5
Torque Specification
110 ft-lbs (149 N·m)
Transmission and Transfer Case
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2 Transfer Case Mounting Bolts
M14 x 1.5
2
Transfer Case Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.
Drive Axles and Half Shafts
1 Drive Axle/Half Shaft Bolts
M12 x 1.5
1
Drive Axle/Half Shaft Bolts
M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
CV Joints and Axles
1 CV Joint/Axle Nut
M16 x 1.5
1
CV Joint/Axle Nut
M16 x 1.5
Torque Specification
185 ft-lbs (251 N·m)
Propeller and Drive Shafts
1 Propeller/Drive Shaft Bolts
M14 x 1.5
1
Propeller/Drive Shaft Bolts
M14 x 1.5
Torque Specification
110 ft-lbs (149 N·m)
Differential and Transfer Case Fluids
1 Differential Drain/Fill Plug
M12 x 1.5
1
Differential Drain/Fill Plug
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
2 Transfer Case Drain/Fill Plug
M12 x 1.5
2
Transfer Case Drain/Fill Plug
M12 x 1.5
Torque Specification
24 ft-lbs (32 N·m)
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Engine Electrical
1 Starter Motor Mounting Bolts
M10 x 1.5
1
Starter Motor Mounting Bolts
M10 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
2 Alternator Mounting Bolts
M10 x 1.5
2
Alternator Mounting Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
3 Ignition Coil Bolt
M6 x 1
3
Ignition Coil Bolt
M6 x 1
Torque Specification
8 ft-lbs (11 N·m)
4 Spark Plug Wire Retainer Bolts
M4 x 0.7
4
Spark Plug Wire Retainer Bolts
M4 x 0.7
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value. May vary depending on the specific application and manufacturer's recommendations.
Battery and Wiring
1 Battery Terminal Nuts
M8 x 1.25
1
Battery Terminal Nuts
M8 x 1.25
Torque Specification
53 in-lbs (6 N·m)
2 Wiring Harness Retainer Bolts
M4 x 0.7
2
Wiring Harness Retainer Bolts
M4 x 0.7
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value. May vary depending on the specific application and manufacturer's recommendations.
Engine Control Module (ECM)
1 Engine Control Module (ECM) Mounting Bolts
M8 x 1.25
1
Engine Control Module (ECM) Mounting Bolts
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. May vary depending on the specific application and manufacturer's recommendations.
2 Fuel Injector Electrical Connector Bolts
M4 x 0.7
2
Fuel Injector Electrical Connector Bolts
M4 x 0.7
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value. May vary depending on the specific application and manufacturer's recommendations.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Exhaust Manifold System
1 Exhaust Manifold/Headers Bolts
M8 x 1.25
1
Exhaust Manifold/Headers Bolts
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
3 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M8 x 1.25
3
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
Catalytic Converter System
1 Catalytic Converter to Exhaust Pipe Bolts
M8 x 1.25
1
Catalytic Converter to Exhaust Pipe Bolts
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2 Catalytic Converter Heat Shield Bolts
M6 x 1.0
2
Catalytic Converter Heat Shield Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure heat shield is properly aligned before tightening.
Egr System
1 EGR Valve Bolts
M6 x 1.0
1
EGR Valve Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the EGR valve is properly aligned before tightening.
Oxygen Sensor System
1 Oxygen Sensor (O2 Sensor) Mounting Nut
M18 x 1.5
1
Oxygen Sensor (O2 Sensor) Mounting Nut
M18 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the sensor is properly aligned before tightening.
2 Downstream O2 Sensor Mounting Nut
M18 x 1.5
2
Downstream O2 Sensor Mounting Nut
M18 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the sensor is properly aligned before tightening.
Exhaust Gas Temperature Sensor System
1 Exhaust Gas Temperature (EGT) Sensor Mounting Bolt
M6 x 1.0
1
Exhaust Gas Temperature (EGT) Sensor Mounting Bolt
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the sensor is properly aligned before tightening.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.5
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper torque to prevent exhaust leaks which can affect engine performance and emissions.
Exhaust Pipe Connections
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Secure connection prevents leaks at critical junctions.
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Proper torque ensures a leak-free connection essential for emissions control.
3 Muffler to Exhaust Pipe Bolts
M10 x 1.5
3
Muffler to Exhaust Pipe Bolts
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Secure fit prevents leaks and reduces noise.
Exhaust Support
1 Exhaust Hanger Bolts
M8 x 1.25
1
Exhaust Hanger Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Proper torque ensures the exhaust system is properly supported, reducing stress on other components.
2 Exhaust Heat Shield Bolts
M6 x 1.0
2
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Proper torque ensures heat shields remain securely in place without over-tightening.
Exhaust Sensors And Joints
1 Oxygen Sensor Bolts
M12 x 1.75
1
Oxygen Sensor Bolts
M12 x 1.75
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Secure fit prevents leaks, which could lead to inaccurate sensor readings.
2 Flex Pipe/Exhaust Joint Bolts
M10 x 1.5
2
Flex Pipe/Exhaust Joint Bolts
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Proper torque ensures a secure connection while allowing for necessary flexibility.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail and Injector System
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Proper torque is necessary to prevent fuel leaks and maintain engine performance.
3 Fuel Injector Rail Bolts
M6 x 1.0
3
Fuel Injector Rail Bolts
M6 x 1.0
Torque Specification
89 in-lbs (10 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
Fuel Pump and Tank System
1 Fuel Pump Mounting Bolts
M12 x 1.75
1
Fuel Pump Mounting Bolts
M12 x 1.75
Torque Specification
89 in-lbs (10 N·m)
Important Notes
Proper torque is necessary to prevent fuel leaks and maintain engine performance.
2 Fuel Tank Strap Bolts
M14 x 2.0
2
Fuel Tank Strap Bolts
M14 x 2.0
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Proper torque is essential to prevent fuel tank damage and maintain safety.
Fuel Filler and Vent System
1 Fuel Filler Neck Bolts
M10 x 1.5
1
Fuel Filler Neck Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Proper torque is necessary to prevent fuel leaks and maintain engine performance.
2 Fuel Tank Vent Valve Bolts
M8 x 1.25
2
Fuel Tank Vent Valve Bolts
M8 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque values. Proper torque is necessary to ensure the fuel tank vent valve is securely mounted and functioning correctly.
Fuel Filter System
1 Fuel Filter Bolt/Nut
M12 x 1.75
1
Fuel Filter Bolt/Nut
M12 x 1.75
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
Fuel Pressure Regulator System
1 Fuel Pressure Regulator Mounting Bolts
M10 x 1.5
1
Fuel Pressure Regulator Mounting Bolts
M10 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 20 ft-lbs (27 N·m)
Important Notes
Estimated torque values. Proper torque is necessary to ensure the fuel pressure regulator is securely mounted and functioning correctly.
Fuel Line System
1 Fuel Line Fittings
M12 x 1.75
1
Fuel Line Fittings
M12 x 1.75
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 20 ft-lbs (27 N·m)
Important Notes
Estimated torque values. Proper torque is necessary to ensure the fuel line fittings are securely connected and prevent fuel leaks.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Compressor and Condenser Mounting
1 A/C Compressor Mounting Bolts
M12 x 1.5
1
A/C Compressor Mounting Bolts
M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Critical for secure attachment to engine block.
2 Condenser Mounting Bolts
M10 x 1.25
2
Condenser Mounting Bolts
M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on industry standards. Consult vehicle manufacturer's specifications for accurate information.
Evaporator and Heater Core Mounting
1 Evaporator Mounting Bolts
M8 x 1.25
1
Evaporator Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards. Consult vehicle manufacturer's specifications for accurate information.
2 Heater Core Mounting Bolts
M6 x 1.0
2
Heater Core Mounting Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on industry standards. Consult vehicle manufacturer's specifications for accurate information.
A/C Line Fittings and Actuators
1 A/C Line Fittings
M10 x 1.25
1
A/C Line Fittings
M10 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Critical for leak-free seal.
2 Blend Door Actuator Mounting Bolts
M5 x 0.8
2
Blend Door Actuator Mounting Bolts
M5 x 0.8
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards. Consult vehicle manufacturer's specifications for accurate information.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Front Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Critical for ensuring proper securement of the strut/shock absorber to the vehicle's frame or steering knuckle.
2 Control Arm Bolts
M12 x 1.25
2
Control Arm Bolts
M12 x 1.25
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Essential for securing the control arms to the frame or steering knuckle.
3 Ball Joint Nut
M16 x 1.5
3
Ball Joint Nut
M16 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Crucial for securing the ball joint to the control arm.
4 Tie Rod End Nut
M14 x 1.25
4
Tie Rod End Nut
M14 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Vital for securing the tie rod end to the steering knuckle.
Rear Suspension
1 Rear Shock Mounting Bolts
M14 x 1.5
1
Rear Shock Mounting Bolts
M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value, may vary depending on vehicle configuration.
Sway Bar and Stabilizer Links
1 Sway Bar Link Nut
M12 x 1.25
1
Sway Bar Link Nut
M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Necessary for securing the sway bar link to the control arm or frame.
2 Stabilizer Link Bolt (AWD models)
M10 x 1.25
2
Stabilizer Link Bolt (AWD models)
M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, may vary depending on vehicle configuration.
Control Arm Bushings
1 Upper Control Arm Bushing Bolts (2WD models)
M10 x 1.25
1
Upper Control Arm Bushing Bolts (2WD models)
M10 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value, may vary depending on vehicle configuration.
2 Lower Control Arm Bushing Bolts (2WD models)
M10 x 1.25
2
Lower Control Arm Bushing Bolts (2WD models)
M10 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value, may vary depending on vehicle configuration.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the torque specification for the lug nuts on a 2015 Lincoln Mkt?
Q1
What IS the torque specification for the lug nuts on a 2015 Lincoln Mkt?
100 ft-lbs (135 Nm)
Q2 What type of torque wrench should be used to tighten the bolts on a Lincoln Mkt?
Q2
What type of torque wrench should be used to tighten the bolts on a Lincoln Mkt?
A click-type torque wrench that IS calibrated to the specific torque specifications
Q3 What are the torque specifications for the spark plugs on a 2010 Lincoln Mkt?
Q3
What are the torque specifications for the spark plugs on a 2010 Lincoln Mkt?
15-20 ft-lbs (20-27 Nm)
Q4 How often should the torque on the bolts and nuts be checked on a Lincoln Mkt?
Q4
How often should the torque on the bolts and nuts be checked on a Lincoln Mkt?
Every 12,000 miles (19,312 km) or 12 months, whichever comes first
Q5 What are the torque specifications for the oil drain plug on a 2019 Lincoln Mkt?
Q5
What are the torque specifications for the oil drain plug on a 2019 Lincoln Mkt?
25-30 ft-lbs (34-41 Nm)
Q6 Can I use an impact wrench to tighten the bolts and nuts on a Lincoln Mkt?
Q6
Can I use an impact wrench to tighten the bolts and nuts on a Lincoln Mkt?
No, an impact wrench should not be used as it can overtighten the bolts and nuts, causing damage
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the mkt.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Engine Component Tightening Procedure
Comprehensive guide for tightening engine components on the Lincoln mkt, including torque specifications.
- Tighten the cylinder head bolts to 45 Nm (33 ft-lb) in three stages.
- Torque the camshaft bolts to 100 Nm (74 ft-lb).
- Tighten the intake manifold bolts to 25 Nm (18 ft-lb).
- Torque the exhaust manifold bolts to 35 Nm (26 ft-lb).
Suspension Component Tightening Procedure
Detailed instructions for tightening suspension components, such as control arms, ball joints, and sway bars.
- Tighten the lower control arm bolts to 120 Nm (89 ft-lb).
- Torque the upper control arm bolts to 90 Nm (66 ft-lb).
- Tighten the ball joint nuts to 55 Nm (41 ft-lb).
- Torque the sway bar end links to 20 Nm (15 ft-lb).
Brake Component Tightening Procedure
Step-by-step guide for tightening brake components, including calipers, rotors, and pads.
- Tighten the caliper mounting bolts to 110 Nm (81 ft-lb).
- Torque the rotor hub bolts to 150 Nm (111 ft-lb).
- Tighten the brake pad retaining bolts to 30 Nm (22 ft-lb).
Technical Service Bulletins
Intake manifold Bolt Torque Specification Update
2017-01-15Correction of torque specification for intake manifold bolts on 2010-2014 mkt models.
2010-2014 mkt
Resolution: Revised torque specification for intake manifold bolts: 28 Nm (21 ft-lb)
Rear Suspension Control Arm Bolt Recall
2019-04-01Safety recall campaign due to incorrect torque specifications for rear suspension control arm bolts.
2015-2019 mkt
Resolution: Inspection and retorquing of rear suspension control arm bolts to 140 Nm (103 ft-lb)
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.