Lincoln Vehicle Models Lincoln MKC 2015-2019
Lincoln Vehicle Models Lincoln MKC 2015-2019 Torque Specifications
Complete Lincoln Vehicle Models Lincoln MKC 2015-2019 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
2.0l I4 Engine
Torque specifications for 2.0L-I4 Engine
2.0l I4 Engine
Torque specifications for 2.0L-I4 Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 20 ft-lbs (27 N·m)
Important Notes
Follow the manufacturer's torque sequence for proper sealing.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the valve cover gasket is properly seated.
3 Rocker Arms/Shafts Bolts
M8 x 1.25
3
Rocker Arms/Shafts Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper valve clearance before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.75
1
Main Bearing Bolts
M12 x 1.75
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Follow the manufacturer's torque sequence for proper alignment.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper rod bearing clearance before tightening.
3 Flywheel Bolts
M10 x 1.5
3
Flywheel Bolts
M10 x 1.5
Torque Specification
63 ft-lbs (85 N·m)
Important Notes
Use thread locker and follow the manufacturer's torque sequence.
Timing System
1 Timing Belt/Chain Tensioner Bolt
M8 x 1.25
1
Timing Belt/Chain Tensioner Bolt
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper tension on the timing belt/chain before tightening.
2 Camshaft Sprocket Bolt
M10 x 1.5
2
Camshaft Sprocket Bolt
M10 x 1.5
Torque Specification
43 ft-lbs (58 N·m)
Important Notes
Ensure proper alignment of timing marks before tightening.
Turbocharger System
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure proper alignment of the turbocharger before tightening.
2 Turbocharger Oil Feed Line Bolts
M6 x 1.0
2
Turbocharger Oil Feed Line Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper sealing of the oil feed line.
2.0l I4 Turbo Engine
Torque specifications for 2.0L-I4-TURBO Engine
2.0l I4 Turbo Engine
Torque specifications for 2.0L-I4-TURBO Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 20 ft-lbs (27 N·m)
Important Notes
Follow the manufacturer's torque sequence for proper sealing.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the valve cover gasket is properly seated.
3 Rocker Arms/Shafts Bolts
M8 x 1.25
3
Rocker Arms/Shafts Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper valve clearance before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.75
1
Main Bearing Bolts
M12 x 1.75
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Follow the manufacturer's torque sequence for proper alignment.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper rod bearing clearance before tightening.
3 Flywheel Bolts
M10 x 1.5
3
Flywheel Bolts
M10 x 1.5
Torque Specification
63 ft-lbs (85 N·m)
Important Notes
Use thread locker and follow the manufacturer's torque sequence.
Timing System
1 Timing Belt/Chain Tensioner Bolt
M8 x 1.25
1
Timing Belt/Chain Tensioner Bolt
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper tension on the timing belt/chain before tightening.
2 Camshaft Sprocket Bolt
M10 x 1.5
2
Camshaft Sprocket Bolt
M10 x 1.5
Torque Specification
43 ft-lbs (58 N·m)
Important Notes
Ensure proper alignment of timing marks before tightening.
Turbocharger System
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure proper alignment of the turbocharger before tightening.
2 Turbocharger Oil Feed Line Bolts
M6 x 1.0
2
Turbocharger Oil Feed Line Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper sealing of the oil feed line.
2.3l I4 Engine
Torque specifications for 2.3L-I4 Engine
2.3l I4 Engine
Torque specifications for 2.3L-I4 Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.25
1
Cylinder Head Bolts
M10 x 1.25
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 20 ft-lbs (27 N·m)
Important Notes
Follow the manufacturer's torque sequence for proper sealing.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.5
1
Main Bearing Bolts
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Follow the manufacturer's torque sequence for proper alignment.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper alignment of connecting rods before tightening.
Timing System
1 Camshaft Sprocket Bolt
M10 x 1.25
1
Camshaft Sprocket Bolt
M10 x 1.25
Torque Specification
43 ft-lbs (58 N·m)
Important Notes
Ensure proper alignment of the timing marks before tightening.
2 Timing Belt Tensioner Bolt
M8 x 1.25
2
Timing Belt Tensioner Bolt
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper tension on the timing belt before tightening.
Turbocharger System
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on similar turbocharger systems.
2 Turbocharger Oil Feed Line Bolt
M6 x 1.0
2
Turbocharger Oil Feed Line Bolt
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar oil line fittings.
2.3l I4 Turbo Engine
Torque specifications for 2.3L-I4-TURBO Engine
2.3l I4 Turbo Engine
Torque specifications for 2.3L-I4-TURBO Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.25
1
Cylinder Head Bolts
M10 x 1.25
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 20 ft-lbs (27 N·m)
Important Notes
Follow the manufacturer's torque sequence for proper sealing.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.5
1
Main Bearing Bolts
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Follow the manufacturer's torque sequence for proper alignment.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper alignment of connecting rods before tightening.
Timing System
1 Camshaft Sprocket Bolt
M10 x 1.25
1
Camshaft Sprocket Bolt
M10 x 1.25
Torque Specification
43 ft-lbs (58 N·m)
Important Notes
Ensure proper alignment of the timing marks before tightening.
2 Timing Belt Tensioner Bolt
M8 x 1.25
2
Timing Belt Tensioner Bolt
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper tension on the timing belt before tightening.
Turbocharger System
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on similar turbocharger systems.
2 Turbocharger Oil Feed Line Bolt
M6 x 1.0
2
Turbocharger Oil Feed Line Bolt
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar oil line fittings.
6f35 Transmission
Torque specifications for 6f35 Transmission
6f35 Transmission
Torque specifications for 6f35 Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M12 x 1.5
1
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Transmission Fluid Drain/Fill Plug
M12 x 1.5
2
Transmission Fluid Drain/Fill Plug
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Bellhousing and Crossmember
1 Transmission Bellhousing Bolts
M16 x 1.5
1
Transmission Bellhousing Bolts
M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2 Transmission Crossmember Bolts
M18 x 1.5
2
Transmission Crossmember Bolts
M18 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Torque Converter
1 Torque Converter Bolts
M14 x 1.5
1
Torque Converter Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Transmission Cooler Lines
1 Transmission Cooler Line Fittings
M10 x 1.25
1
Transmission Cooler Line Fittings
M10 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension and Steering
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
3 Ball Joint Nut
M18 x 1.5
3
Ball Joint Nut
M18 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
4 Tie Rod End Nut
M12 x 1.5
4
Tie Rod End Nut
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
5 Sway Bar Link Nut
M12 x 1.5
5
Sway Bar Link Nut
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
6 Steering Gear/Rack Bolts
M14 x 1.5
6
Steering Gear/Rack Bolts
M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Body Mounts
1 Body Mount Bolts
M16 x 1.5
1
Body Mount Bolts
M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Doors and Hinges
1 Door Hinge Bolts
M10 x 1.5
1
Door Hinge Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2 Trunk Lid Hinge Bolts
M10 x 1.5
2
Trunk Lid Hinge Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
3 Hood Hinge Bolts
M10 x 1.5
3
Hood Hinge Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper and Mounting
1 Brake Caliper Bolts
M12 x 1.5
1
Brake Caliper Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value, may vary depending on vehicle and component manufacturer.
2 Brake Caliper Mounting Bracket Bolts
M14 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M14 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value, may vary depending on vehicle and component manufacturer.
Brake Disc/Drum and Rotor
1 Brake Disc/Drum Retaining Bolts
M10 x 1.25
1
Brake Disc/Drum Retaining Bolts
M10 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value, may vary depending on vehicle and component manufacturer.
2 Brake Rotor Bolts (if applicable)
M12 x 1.5
2
Brake Rotor Bolts (if applicable)
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, may vary depending on vehicle and component manufacturer.
Brake Master Cylinder and ABS Module
1 Brake Master Cylinder Mounting Bolts
M10 x 1.25
1
Brake Master Cylinder Mounting Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value, may vary depending on vehicle and component manufacturer.
2 ABS Module Mounting Bolts
M8 x 1.25
2
ABS Module Mounting Bolts
M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value, may vary depending on vehicle and component manufacturer.
Brake Hose and Wheel Lug Nuts
1 Brake Hose Banjo Bolts
M12 x 1.5
1
Brake Hose Banjo Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value, may vary depending on vehicle and component manufacturer.
2 Wheel Lug Nuts
M14 x 1.5
2
Wheel Lug Nuts
M14 x 1.5
Torque Specification
95 ft-lbs (129 N·m)
Important Notes
Estimated value, may vary depending on vehicle and component manufacturer.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine Block and Crankshaft
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Connecting Rods and Pistons
1 Connecting Rod Nuts
M12 x 1.25
1
Connecting Rod Nuts
M12 x 1.25
Torque Specification
32 ft-lbs (43 N·m)
Flywheel and Clutch
1 Flywheel Bolts
M14 x 1.5
1
Flywheel Bolts
M14 x 1.5
Torque Specification
62 ft-lbs (84 N·m)
Transmission and Bellhousing
1 Engine Block to Transmission Bellhousing Bolts
M12 x 1.25
1
Engine Block to Transmission Bellhousing Bolts
M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
2 Transmission Mounting Bolts
M14 x 1.5
2
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Transmission Oil Pan and Crossmember
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
2 Transmission Crossmember Bolts
M14 x 1.5
2
Transmission Crossmember Bolts
M14 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value based on general industry standards.
Drive Axle and Half Shaft
1 Drive Axle/Half Shaft Bolts
M16 x 1.5
1
Drive Axle/Half Shaft Bolts
M16 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
CV Joint and Axle Nut
1 CV Joint/Axle Nut
M20 x 1.5
1
CV Joint/Axle Nut
M20 x 1.5
Torque Specification
190 ft-lbs (258 N·m)
Propeller/Drive Shaft and Differential
1 Propeller/Drive Shaft Bolts
M14 x 1.5
1
Propeller/Drive Shaft Bolts
M14 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Differential Drain/Fill Plug
M12 x 1.25
2
Differential Drain/Fill Plug
M12 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
3 Differential Cover Bolts
M10 x 1.25
3
Differential Cover Bolts
M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on general industry standards.
Axle Shaft and Hub
1 Axle Shaft to Hub Bolts
M16 x 1.5
1
Axle Shaft to Hub Bolts
M16 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Estimated value based on general industry standards.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Alternator And Starter Motor
1 Alternator Mounting Bolts
M12 x 1.5
1
Alternator Mounting Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Consult the vehicle's service manual for accurate specifications.
2 Starter Motor Mounting Bolts
M14 x 1.5
2
Starter Motor Mounting Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Consult the vehicle's service manual for accurate specifications.
Battery And Electrical Connectors
1 Battery Terminal Nuts
M8 x 1.25
1
Battery Terminal Nuts
M8 x 1.25
Torque Specification
7 ft-lbs (9 N·m)
2 Fuel Pump Electrical Connector Bolts
M6 x 1.0
2
Fuel Pump Electrical Connector Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Consult the vehicle's service manual for accurate specifications.
3 A/C Compressor Electrical Connector Bolts
M6 x 1.0
3
A/C Compressor Electrical Connector Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Consult the vehicle's service manual for accurate specifications.
4 Ignition Coil Bracket Bolts
M10 x 1.5
4
Ignition Coil Bracket Bolts
M10 x 1.5
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Consult the vehicle's service manual for accurate specifications.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Egr System
1 EGR Valve Bolts
M8 x 1.25
1
EGR Valve Bolts
M8 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Torque value is an average estimate based on typical EGR valve bolt sizes.
Exhaust Manifold
1 Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average estimate based on typical exhaust manifold bolt sizes.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is an average estimate based on typical cylinder head bolt sizes.
Exhaust Pipe
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average estimate based on typical exhaust pipe bolt sizes.
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average estimate based on typical catalytic converter bolt sizes.
Emissions Sensors
1 Oxygen Sensor (O2 Sensor)
M18 x 1.5
1
Oxygen Sensor (O2 Sensor)
M18 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value is an average estimate based on typical oxygen sensor sizes.
2 NOx Sensor Bolts
M8 x 1.25
2
NOx Sensor Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is an average estimate based on typical NOx sensor bolt sizes.
Catalytic Converter
1 Catalytic Converter Mounting Bolts
M10 x 1.5
1
Catalytic Converter Mounting Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average estimate based on typical catalytic converter bolt sizes.
Diesel Particulate Filter
1 DPF Mounting Bolts
M10 x 1.5
1
DPF Mounting Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average estimate based on typical DPF bolt sizes.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is estimated based on typical M8 bolt specifications for exhaust manifolds.
Exhaust Pipe Connections
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is estimated based on typical M10 bolt specifications for exhaust systems.
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is estimated based on typical M10 bolt specifications for exhaust systems.
3 Muffler to Exhaust Pipe Bolts
M10 x 1.5
3
Muffler to Exhaust Pipe Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is estimated based on typical M10 bolt specifications for exhaust systems.
Exhaust Hangers
1 Exhaust Hanger Bolts
M8 x 1.25
1
Exhaust Hanger Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is estimated based on typical M8 bolt specifications for exhaust hangers.
Oxygen Sensors
1 Oxygen Sensor Bolts
M12 x 1.25
1
Oxygen Sensor Bolts
M12 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is estimated based on typical M12 bolt specifications for oxygen sensors.
Heat Shields
1 Exhaust Heat Shield Bolts
M6 x 1.0
1
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value is estimated based on typical M6 bolt specifications for heat shields.
Exhaust Flanges
1 Exhaust Flange Bolts
M10 x 1.5
1
Exhaust Flange Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is estimated based on typical M10 bolt specifications for exhaust flanges.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail and Injector System
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
3 Fuel Injector Rail Bolts
M8 x 1.25
3
Fuel Injector Rail Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Fuel Pump and Tank System
1 Fuel Pump Mounting Bolts
M12 x 1.75
1
Fuel Pump Mounting Bolts
M12 x 1.75
Torque Specification
30 ft-lbs (41 N·m)
2 Fuel Tank Strap Bolts
M12 x 1.75
2
Fuel Tank Strap Bolts
M12 x 1.75
Torque Specification
30 ft-lbs (41 N·m)
Fuel Filler and Filter System
1 Fuel Filler Neck Bolts
M10 x 1.5
1
Fuel Filler Neck Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
2 Fuel Filter Bolt/Nut
M12 x 1.75
2
Fuel Filter Bolt/Nut
M12 x 1.75
Torque Specification
25 ft-lbs (34 N·m)
Fuel Pressure Regulator System
1 Fuel Pressure Regulator Mounting Bolts
M8 x 1.25
1
Fuel Pressure Regulator Mounting Bolts
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on industry standards.
Fuel Line Fittings System
1 Fuel Line Fittings
M10 x 1.5
1
Fuel Line Fittings
M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on industry standards.
Fuel Injector O Ring Seals System
1 Fuel Injector O-Ring Seals
1
Fuel Injector O-Ring Seals
Torque Specification
N/A
Important Notes
Hand tight only. Do not overtighten.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Air Conditioning System
1 A/C Compressor Mounting Bolts
M10 x 1.5
1
A/C Compressor Mounting Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Torque value is an estimated average within the given range.
2 A/C Line Fittings
M8 x 1.25
2
A/C Line Fittings
M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Torque value is an estimated average within the given range.
3 Condenser Mounting Bolts
M10 x 1.5
3
Condenser Mounting Bolts
M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Torque value is an estimated average within the given range.
4 Evaporator Core Housing Bolts
M6 x 1.0
4
Evaporator Core Housing Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value is an estimated average within the given range.
Heating System
1 Heater Core Inlet/Outlet Pipe Bolts
M6 x 1.0
1
Heater Core Inlet/Outlet Pipe Bolts
M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Torque value is an estimated average within the given range.
2 Water Pump Bolts
M8 x 1.25
2
Water Pump Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is an estimated average within the given range.
Air Circulation System
1 Blower Motor Mounting Bolts
M6 x 1.0
1
Blower Motor Mounting Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value is an estimated average within the given range.
Control System
1 HVAC Control Module Mounting Bolts
M6 x 1.0
1
HVAC Control Module Mounting Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value is an estimated average within the given range.
Thermostat System
1 Thermostat Housing Bolts
M6 x 1.0
1
Thermostat Housing Bolts
M6 x 1.0
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value is an estimated average within the given range.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Front Suspension
1 Control Arm Bolts
M14 x 1.5
1
Control Arm Bolts
M14 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Estimated torque value based on similar components and bolt sizes.
2 Ball Joint Nut
M16 x 1.5
2
Ball Joint Nut
M16 x 1.5
Torque Specification
80 ft-lbs (109 N·m)
Important Notes
Estimated torque value based on similar components and bolt sizes.
3 Tie Rod End Nut
M12 x 1.5
3
Tie Rod End Nut
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated torque value based on similar components and bolt sizes.
4 Upper Control Arm Bushing Bolts
M10 x 1.5
4
Upper Control Arm Bushing Bolts
M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value based on similar components and bolt sizes.
5 Lower Control Arm Bolts
M14 x 1.5
5
Lower Control Arm Bolts
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated torque value based on similar components and bolt sizes.
6 Steering Knuckle Bolts
M16 x 1.5
6
Steering Knuckle Bolts
M16 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated torque value based on similar components and bolt sizes.
Rear Suspension
1 Strut/Shock Absorber Mounting Bolts
M12 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated torque value based on similar components and bolt sizes.
2 Sway Bar Link Nut
M12 x 1.5
2
Sway Bar Link Nut
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated torque value based on similar components and bolt sizes.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the proper torque for the cylinder head bolts on a 2015-2019 LINCOLN mkc?
Q1
What IS the proper torque for the cylinder head bolts on a 2015-2019 LINCOLN mkc?
Follow the Ford service manual guidelines for your specific engine and year model. Cylinder head bolt torque specifications vary based on engine size. Refer to the LINCOLN technical data for precise torque values.
Q2 Can I use a regular torque wrench for automotive repairs?
Q2
Can I use a regular torque wrench for automotive repairs?
No, it IS highly recommended to use a calibrated torque wrench specifically designed for automotive applications. Regular torque wrenches may not provide the necessary accuracy and precision required for critical automotive components.
Q3 How often should I retorque the lug nuts on my LINCOLN mkc wheels?
Q3
How often should I retorque the lug nuts on my LINCOLN mkc wheels?
Check and retorque your lug nuts after the first 50-100 miles of driving, and then every 6 months or 6,000 miles thereafter. This helps ensure proper wheel mounting and prevents potential safety hazards.
Q4 What are the torque specifications for the suspension components on a 2015-2019 LINCOLN mkc?
Q4
What are the torque specifications for the suspension components on a 2015-2019 LINCOLN mkc?
Refer to the LINCOLN repair manual for your specific model year. Suspension component torque specifications vary depending on the suspension system and configuration. Always consult the official manufacturer's guidelines.
Q5 How do I properly torque a bolt or nut to avoid over- or under-tightening?
Q5
How do I properly torque a bolt or nut to avoid over- or under-tightening?
Use a properly calibrated torque wrench and follow the specified torque value for the component. Gradually apply force until the desired torque IS reached. Do not exceed the specified torque or use excessive force, as this can damage the component or fastener.
Q6 What IS the difference between torque and tension?
Q6
What IS the difference between torque and tension?
Torque IS a rotational force applied to a fastener, while tension IS the internal force within the fastener. Torque IS used to achieve the desired tension, which IS critical for proper component function and safety.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the mkc.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Torque Multiplier (3:1 ratio)
Amplifies torque output, making it easier to tighten high-torque bolts. Ideal for suspension and driveline components.
- 3:1 ratio for increased torque output
- Durable construction for longevity
- Easy to use with standard torque wrenches
Service Procedures
Suspension Component Torque Specifications
Technical procedure overview for tightening suspension components on the mkc.
- Tighten front lower control arm bolts to 100 Nm
- Tighten front upper control arm bolts to 65 Nm
- Tighten rear lower control arm bolts to 120 Nm
- Tighten rear upper control arm bolts to 80 Nm
- Tighten sway bar end links to 25 Nm
Engine Component Torque Specifications
Technical procedure overview for tightening engine components on the mkc.
- Tighten cylinder head bolts to 100 Nm in a specific sequence
- Tighten intake manifold bolts to 25 Nm
- Tighten exhaust manifold bolts to 30 Nm
- Tighten timing cover bolts to 15 Nm
- Tighten oil pan bolts to 12 Nm
Technical Service Bulletins
Driveline Vibration and Noise Technical Service Bulletin
2016-08-01Addresses excessive driveline vibration and noise issues on 2015-2019 mkc models.
2015-2019 mkc
Resolution: Replaces the rear driveshaft assembly. Torque specifications for driveshaft bolts: 90 Nm.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.