Lincoln Lincoln MKZ 2013-2016 3.7L V6 Engine Specifications
Explore detailed technical specifications for the 2013-2016 Lincoln MKZ 3.7L V6 engine. Learn about horsepower, torque, fuel system, and more for maintenance, repair, or performance upgrades.
Overview Specifications
This document provides detailed specifications and technical information about the 3.7L V6 engine used in the 2013-2016 Lincoln MKZ. It is designed to assist users in understanding the engine's performance, features, and maintenance requirements. The content is organized into sections for easy navigation, with subsections breaking down specific aspects of the engine. Use the search and navigation instructions to quickly find the information you need.
How to Use
Use the search bar to enter keywords related to the 3.7L V6 engine, such as 'horsepower' or 'fuel efficiency'. The results will highlight relevant sections and subsections for quick access.
Scroll through the document or use the table of contents to jump to specific sections. Each section is divided into subsections with detailed technical points for easy reference.
Key Specifications
Displacement
3.7 liters
Horsepower
300 hp
Torque
277 lb-ft
Fuel Economy
21 mpg combined
Compression Ratio
10.3:1
Available Specifications
Engine Performance
This section covers the performance metrics of the 3.7L V6 engine, including horsepower, torque, and acceleration. It also includes details on fuel efficiency and emissions.
Engine Performance
This section covers the performance metrics of the 3.7L V6 engine, including horsepower, torque, and acceleration. It also includes details on fuel efficiency and emissions.
Power Output
- 300 horsepower at 6,500 rpm
- 277 lb-ft of torque at 4,000 rpm
- 0-60 mph acceleration in 6.2 seconds
- Top speed of 130 mph (electronically limited)
Fuel Efficiency
- 18 mpg city
- 27 mpg highway
- 21 mpg combined
- Direct injection technology for improved efficiency
Engine Design
This section provides an overview of the 3.7L V6 engine's design, including its construction, materials, and key technologies.
Engine Design
This section provides an overview of the 3.7L V6 engine's design, including its construction, materials, and key technologies.
Construction
- Aluminum block and cylinder heads
- Dual overhead camshafts (DOHC)
- 24-valve configuration
- Forged steel crankshaft
Technologies
- Twin independent variable camshaft timing (Ti-VCT)
- Electronic throttle control
- Sequential multi-port fuel injection
- Low-friction piston rings
Maintenance and Durability
This section outlines maintenance requirements and durability features of the 3.7L V6 engine, including recommended service intervals and longevity.
Maintenance and Durability
This section outlines maintenance requirements and durability features of the 3.7L V6 engine, including recommended service intervals and longevity.
Service Intervals
- Oil change every 7,500 miles or 6 months
- Spark plug replacement every 100,000 miles
- Air filter replacement every 30,000 miles
- Coolant flush every 100,000 miles
Durability Features
- High-strength alloy components
- Thermal management system
- Extended-life coolant
- Corrosion-resistant coatings
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
Overview
- Type
- Naturally Aspirated V6
- Configuration
- 60-degree V-angle
- Platform
- Ford Cyclone Engine Family
- Material
- Aluminum block and heads
- Location
- Front-engine, transverse-mounted
Dimensions
- Length
- 24.5 inches (622.3 mm)
- Width
- 28.7 inches (729 mm)
- Height
- 27.6 inches (701 mm)
- Displacement
- 226.5 cubic inches (3.7 liters)
- Bore
- 3.7 inches (94 mm)
- Stroke
- 3.4 inches (86.7 mm)
- Weight
- 375 lbs (170 kg)
Materials
- Engine Block
- Aluminum alloy
- Cylinder Heads
- Aluminum alloy
- Pistons
- Forged aluminum
- Crankshaft
- Forged steel
- Valves
- Stainless steel
Features
- Performance
-
- 300 horsepower @ 6500 rpm
- 277 lb-ft torque @ 4000 rpm
- Dual overhead camshafts (DOHC)
- Variable camshaft timing (VCT)
- Fuel System
-
- Sequential multi-port fuel injection
- Electronic throttle control
- 87 octane fuel compatibility
- Cooling
-
- High-flow water pump
- Dual-pass cooling system
- Thermostatically controlled electric fan
- Ignition
-
- Coil-on-plug ignition system
- Platinum-tipped spark plugs
- Waste spark elimination
- Emissions
-
- Low-friction piston rings
- Close-coupled catalytic converters
- EGR system with cooled exhaust gas recirculation
Safety Features
- Engine Protection
-
- Knock sensor for detonation prevention
- Low oil pressure shutdown
- Over-temperature protection
- Emissions Control
-
- OBD-II compliant diagnostics
- Evaporative emissions system
- Secondary air injection
Comfort Features
- Noise Reduction
-
- Acoustic engine cover
- Hydraulic engine mounts
- Tuned intake manifold
- Vibration Control
-
- Balanced crankshaft
- Dual-mass flywheel
- Isolated fuel rail
Accessories
- Belts And Pulleys
-
- Serpentine belt with automatic tensioner
- Accessory drive pulley system
- Power steering pump
- Sensors
-
- Crankshaft position sensor
- Camshaft position sensor
- Knock sensor
- Filters
-
- High-capacity oil filter
- Dual-element air filter
- Fuel filter
Maintenance
- Service interval
- Every 7,500 miles or 6 months
- Service Items
-
- Oil and filter change
- Air filter inspection
- Spark plug replacement
- Timing chain inspection
- Coolant flush
- Maintenance Notes
- Use synthetic 5W-20 oil for optimal performance
Warranty
- Basic
- Miles: 36,000Years: 3Coverage: Bumper-to-bumper
- Powertrain
- Miles: 60,000Years: 5Coverage: Engine and transmission
- Corrosion
- Miles: UnlimitedYears: 5Coverage: Perforation from corrosion
- Roadside Assistance
- Miles: 60,000Years: 5Coverage: 24/7 roadside assistance
Production Details
- Manufacturer
- Ford Motor Company
- Manufacturing Process
-
- Precision CNC machining
- Automated assembly line
- Laser-guided quality control
- Quality Control
- Dimensional Checks: 100% inspectionLeak Testing: Air and fluid pressure testsPerformance Testing: Dynamometer testing
- Sustainability Practices
-
- Recycled aluminum usage
- Low-VOC coatings
- Energy-efficient manufacturing
- Production Metrics
- Units Per Day: 500Defect Rate: 0.01%Energy Consumption: 15 kWh per engine
Service Information for 3.7l v6 engine Service
Maintenance and service requirements specific to this component
- Oil and filter change
- Inspect air filter
- Check spark plugs
- Inspect timing chain
- Top off fluids
Use synthetic 5W-20 oil for optimal performance
- Replace air filter
- Inspect fuel system
- Check ignition system
- Inspect cooling system
- Test emissions system
Ensure all sensors are functioning properly
- Replace spark plugs
- Flush coolant system
- Inspect timing chain and tensioners
- Check engine mounts
- Perform compression test
Critical to replace timing components if wear is detected
Common Questions
Find answers to common questions about torque specifications
Q1 Is the 3.7L V6 engine compatible with other Lincoln models?
Is the 3.7L V6 engine compatible with other Lincoln models?
The 3.7L V6 engine used in the 2013-2016 Lincoln MKZ is specifically designed for this model. While it shares some similarities with engines in other Ford and Lincoln vehicles, direct compatibility is limited. Always verify with a certified technician or refer to the vehicle's service manual before attempting any cross-model installations.
Q2 What are the maintenance requirements for the 3.7L V6 engine?
What are the maintenance requirements for the 3.7L V6 engine?
The 3.7L V6 engine requires regular maintenance to ensure optimal performance. Key tasks include oil changes every 7,500 miles, air filter replacement every 15,000 miles, and spark plug replacement every 60,000 miles. Additionally, coolant and transmission fluid should be checked and replaced as per the manufacturer's recommendations. Regular inspections of belts and hoses are also essential.
Q3 How do I replace the 3.7L V6 engine in my Lincoln MKZ?
How do I replace the 3.7L V6 engine in my Lincoln MKZ?
Replacing the 3.7L V6 engine involves several steps: disconnect the battery, drain fluids, remove the engine mounts, and detach electrical connections. Use a hoist to lift the engine out and reverse the process to install the new one. Ensure all connections are secure and refill fluids. It's recommended to consult the service manual or seek professional assistance for this complex task.
Q4 What should I do if my 3.7L V6 engine is overheating?
What should I do if my 3.7L V6 engine is overheating?
If your 3.7L V6 engine is overheating, first check the coolant level and inspect for leaks. Ensure the radiator fan is functioning and the thermostat is not stuck. If the issue persists, it could indicate a failing water pump or a blocked radiator. Diagnostic tools can help pinpoint the problem, but professional assistance is recommended for accurate troubleshooting.
Q5 How can I optimize the performance of my 3.7L V6 engine?
How can I optimize the performance of my 3.7L V6 engine?
To optimize the 3.7L V6 engine's performance, use high-quality synthetic oil and ensure timely maintenance. Upgrading the air intake and exhaust systems can improve airflow and efficiency. Regularly check and replace worn-out components like spark plugs and filters. Additionally, using premium fuel and keeping the engine tuned can enhance overall performance and fuel economy.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
2013-2016 Lincoln MKZ Service Manual
Coming SoonComprehensive guide covering maintenance, repair, and troubleshooting for the 3.7L V6 engine and other components.
Technical Service Bulletin for 3.7L V6 Engine
Coming SoonLatest updates and fixes for common issues related to the 3.7L V6 engine in the Lincoln MKZ.
Lincoln MKZ Parts and Accessories Catalog
Coming SoonDetailed catalog of OEM and aftermarket parts for the 2013-2016 Lincoln MKZ, including engine components.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.